Yield enhancement of elliptical high harmonics driven by bicircular laser pulses

We theoretically investigate the yield enhancement of elliptical high harmonics in the interaction of molecules with bicircular laser pulses by solving the time-dependent Schrödinger equation. It is shown that by adjusting the relative intensity ratio of the two bicircular field components in specific ranges the yield of the molecular high harmonics for the plateau and cutoff regions can be respectively enhanced. To analyze this enhancement phenomenon, we calculate the weights of the electron classical trajectories. Additionally, we also study the ellipticity distribution of harmonics for different intensity ratios. We find that these enhanced harmonics are elliptically polarized, which we mainly attribute to the recombination dipole moment of the major weighted trajectories. These enhanced elliptical extreme ultraviolet and soft x-ray radiations may serve as essential tools for exploring the ultrafast dynamics in magnetic materials and chiral media.     

Analysis on X-Ray Laser Generation with EM-Wave Wiggler

The possibility of realizing SASE Free Election Laser in x-ray waveband with EM-wave wiggler is studied in this paper. SASE effect including saturation length, saturation power and nonlinear process is explored through a 3-D simulation code. A utilization of seed light from laser plasma x-ray is also analyzed, which demonstrates the feature of shortening the interaction length for saturation. The results show that sizeable output power of x-ray laser would be generated with a middle energy electron beam.     

Application of x-ray fluorescence analysis to investigation of the composition of gunshot residues

We have used x-ray fluorescence analysis to study the elemental composition of gunshot residues from smooth-bore and rifled-bore guns. We have established that it is possible to differentiate between types of projectiles (jacketed/lead), types of primers (corrosive/noncorrosive), and types of propellant powders (black/smokeless) by analysis of the elemental composition of the gunshot residues. We have shown that the mercury content in gunshot residues on the surface of the object carrying the residues steadily decreases as storage time increases. Despite this fact, mercury can be preserved as a component of gunshot residues on the object (cotton cloth) under room conditions for more than 45 days. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 3, pp. 320–325, May–June, 2006.     

Intermolecular Interactions in 8-Aza-D-Homogonane Crystals and their Manifestation in the IR Spectra

Crystalline modifications of 8-aza-D-homogon-1,3,5(10),13-tetraen-12,17a-dione have been investigated by IR spectroscopy and x-ray structural analysis. It is shown that this compound crystallizes from solutions of chloroform with hexane in the form of a solvate comprised of chelate hydrogen bonds between the hydrogen atom of the chloroform molecule and the oxygen atoms of the carbonyl groups of the 8-azasteroid molecule. A relation between the changes in the characteristic absorption bands of the CH₂-, C=O-, and I=C groups and the structure of the crystalline modifications has been established.     

双驱动x射线激光等离子体能谱特性研究

用时间积分空间分辨的平晶千电子伏谱仪测量了钽激光等离子体发射波长范围为045— 075nm的软x射线能谱，精确测量和准确辨认出类镍、类钴和类铁离子的共振线及类镍离子 的内壳层跃迁线-对实验结果处理，获得了辐射线谱的强度-通过谱线比率的诊断推断脉冲激 光时差对等离子体状态的影响，至少也可部分解释激光上能级的粒子数及等离子体的 电离程度- 关键词： 离子谱特性 软x线能谱强度 谱线辨认     

神光Ⅱ上柱形黑腔辐射驱动冲击波

利用神光Ⅱ的八路三倍频激光装置，驱动柱形黑腔产生的x 射线作辐射源驱动台阶铝样品产生冲击波，获得了清晰的冲击波图像，通过冲击波过台阶样 品的时间差获得冲击波速度和压力分别为31.2km/s和17.5×10⁵MPa.采用软x射线能谱 仪通过激光注入孔测量的辐射温度与采用冲击波法测量辐射温度的结果一致. 关键词： 冲击波 辐射驱动 辐射温度     

某些类氖离子和类镍离子等离子体状态对应关系的研究

利用一维拉格朗日流体动力学程序Med103详细研究了产生类镍Ag,Cd,In,Sn, Sb离子和类氖Fe,Co,Ni,Cu,Zn离子的等离子体状态.通过对电子温度、离子丰度、离子数密度等状态参量的分析比较，得到了这两类等离子体状态之间的对应关系.即类镍银的等离子体状态与类氖铁 的相近，类镍镉的与类氖钴的相近，依次类推.利用这一对应关系可以方便地由类氖机理x射线激光的等离子体状态来对相应元素的类镍x射线激光的等离子体状态进行判断. 关键词： 类氖 类镍 等离子体状态 x射线激光     

Synthesis and structure of O-(arylcarbamoyl)butyrhydroximoyl chlorides

The O-(arylcarbamoyl)butyrhydroximoyl chlorides were synthesized, and the x-ray structural analysis (XSA) of one of them — O-(o-tolylcarbamoyl)butyrhydroximoyl chloride — was performed. It was established from the data of the XSA and the PMR spectra that all synthesized compounds are the Z isomers.Institute of Physiologically Active Substances, Russian Academy of Sciences, 142432 Chernogolovka. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 2, pp. 315–319, February, 1992.     

Effects of nickel on the crystallization of Zr70Cu20Ni10 amorphous alloy

Differential scanning calorimetry (DSC) and x-ray diffraction (XRD) are employed to investigate the effects of nickel on the crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy. We have found that the crystallization process of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy is strongly influenced by the addition of nickel. Addition of 10 at% Ni to the Zr₇₀Cu₃₀ amorphous alloy makes the crystallization process proceed from a single-stage mode to a double-stage mode. The activation energy for crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy is calculated to be about 388kJ·mol^-1 on the basis of the Kissinger equation. The effects of nickel on the crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy are discussed in terms of the genetics of metals.     

Design and fabrication of fluid controlled dynamic optical lens system

A novel small fluid controlled optical lens system that is capable of displaying dynamic variation of its focal length and field-of-view (FOV) is designed and fabricated. In this active lens system, appropriate volume of the optical fluid can be pumped into or out of the lens chamber to provide double-convex (DCX) or double-concave (DCV) lens effect. Simple optical imaging experiments were performed using different sets of glass lenses with fixed focal lengths to determine the optimum lens configuration required for designing a dynamic optical lens system. The experimental results obtained from the glass lenses demonstrate that a combination of a single DCX lens with three DCV lenses provides a wider FOV. The flexible membranes for fluid controlled lenses were fabricated using polydimethylsiloxane polymer material, which has good optical transparency and elasticity. A simple fluid injection system is used to vary the radius of curvature of the lenses, and thereby to change the focal length. A dynamic optical lens system with a combination of one DCX and multiple variable focal length DCV lenses as designed here can image an object with a wide range of focal length and FOV. With this fluid controlled optical system, the FOV and focal length could be continuously varied and a maximum FOV of 118.3° could be achieved. The smallest f-number (f_/#) for this fluid controlled single lens system was found to be 1.3, which corresponds to the numerical aperture value of 0.35.